mywifiext

Home
Netgear Nighthawk extender setup
Netgear Genie Setup
Contact us

Netgear EAX14 Setup

With your current router, the Netgear EAX14 Setup can establish a mesh network to deliver lag-free connectivity. You should definitely conduct the Netgear EAX14 configuration with your present router if you want to be able to connect to the internet without worrying about signal drop.

New Extender Extender
Netgear EAX14 Setup

How to Set Up Netgear EAX14 WiFi Extender?

Using the Nighthawk mobile app, installing the EAX14 range extender is simple. However, you should first reset your Netgear WiFi extender. This is only to make sure that the extender is operating at its factory default settings. Here’s how you use the app to set up the extender:

  • Verify that the EAX14 extender is powered on and positioned close to the router.
  • On your tablet or phone, download and install the Netgear Nighthawk app.
  • Using the WiFi tool, connect your smartphone to the Netgear_EXT default WiFi network.
  • Check the label on the extender if you are unsure of the WiFi password. 
  • Using the Nighthawk app is the next step.
  • In case this is your first visit, you’ll be required to register for an account.
  • For that, use your email address and password.
  • There will be a few prompts displayed on the screen.
  • To get your Netgear EAX14 extender operating, adhere to these instructions. 

 

Note: If you need any assistance regarding your Netgear wifi extender, get in touch with us via the chat button you see on the bottom right corner of this page.

Netgear EAX14 WPS Setup

If the WPS button is present on your host router, you’re in luck. This will make it impossible for you to complete the time-consuming procedure of following to the in-app instructions. All you need to do to finish setting up the Netgear EAX14 is push the WPS button on both the router and the extension within two minutes. To enable dual-band radio on the router, press the WPS buttons twice. This method works well for setting up the Netgear AX1800 as well. 

What Does the EAX14 WiFi Extender Manual Consist Of?

An EAX14 range extender also comes with a user manual, just like any other Netgear product. All of the information about the extender is contained in this manual. 

  1. Details of the Netgear EAX14 extender in LED
  2. Details about ports and buttons
  3. directions for using several ways to connect to the internet
  4. How to reset a WiFi extender: Steps
  5. instructions for using the 192.168.1.250 IP address to modify the default login information
  6. Details of the firmware update for the extender
  7. Security information for WiFi extenders 

How to Log in to Netgear EAX14 via Web Browser?

Once the extender is configured using the WPS method or the Nighthawk app, you may adjust its various settings by logging in with a web browser. After login in, you may also update the firmware on the extender. You can reach the mywifiext login URL and log in to the EAX14 WiFi extender by following the procedures listed below:

  • Using WiFi or an Ethernet connection, connect your PC to the Netgear extender network.
  • Open a modern web browser right now.
  • Enter mywifiext.net into the address area and hit Enter.
  • There will be a window for login.
  • Admin will be the username.
  • Enter the password you gave your Netgear EAX14 extender after installation into the Password area.
  • Case matters for both the password and the username.
  • Press the Log In button.
  • You will be directed to the STATUS page for the Netgear EAX14.

You can access your Netgear EAX14 extender by logging in this way. Keep in mind that the mywifiext.net address is only compatible with Windows PCs. If you’re using a Mac, use mywifiext.local to continue.

How to Update Netgear EAX14 Firmware?

To maintain the seamless operation of your extender, you must regularly upgrade the most recent firmware version. To upgrade the firmware on your Netgear EAX14 range extender, follow the steps listed below:

  • Go to the Netgear Get Center on your PC to get the most recent firmware file for your range extender.
  • Unzip the file as soon as possible if it is necessary.
  • Open a new tab in the browser and go to mywifiext.net.
  • Enter the extender’s login credentials to log in.
  • Look under Administration for the Firmware Update option on the dashboard.
  • Locate and upload the firmware file using the Upload button.
  • Hold off till your EAX14 reboots and the firmware is updated.

Quick Tip: When updating the firmware on your Netgear EAX14 extender, try not to turn it off or unplug it from the router. This could cause a process halt.

How to Reset Netgear EAX14 Extender?

If the extender is not performing up to par, you may need to reset it. The following lists the steps needed to reset the extender.

  • Make sure the power source for your extender is steady.
  • Locate the Reset button and use a sharp tool to press it.
  • To finish the reset, hold down the button for seven to fifteen seconds.

You will be able to reset your Netgear range extender this way. However, be aware that after that, you will need to finish the Netgear EAX14 configuration all over again. If you have already registered your extender on the MyNetgear portal, you can skip this step.