Netgear EX6130 Setup

You can quickly and easily set up your Netgear EX6130 setup. Simply plug it into an outlet near your router to connect to its WiFi network, then use a web browser to follow the instructions displayed on the screen. In a matter of minutes, your home or place of business may have wider WiFi coverage, guaranteeing a stable and strong connection everywhere.

Netgear EX6130 Extender Setup | WPS Method

Netgear EX6130 WiFi Extender Setup Manually

After plugging in the Netgear EX6130 extender, check the solidification of the power LED.
WPS key is depressed.
Give it a two-minute click on the WPS button.
Wait for the WPS LED on the extender to solidify, indicating that the connection was successful.
Repeat steps 2-4 if you have a dual-band router.
Link the devices that support WiFi to the main network.
As near to your router as possible is how you should position the extender.
You’ll have more WiFi coverage with your Netgear EX6130.

Insert the Netgear EX6130 extender near your router.
Link your PC to the internet connection of the extender.
Open a web browser and type mywifiext.net setup into the address box.
Proceed with the setup instructions shown on the screen to connect the extender to your existing WiFi network.
Once connected, reposition the extension to its ideal location.
Connect your devices to the extended WiFi network.
To increase WiFi coverage, make the most of your Netgear EX6130 extender.

Note: If you need any assistance regarding your Netgear wifi extender, get in touch with us via the chat button you see on the bottom right corner of this page.

Netgear EX6130 WiFi Range Extender | Firmware Update

How do I login to the Netgear EX6130?

Connect your PC to the Netgear EX6130 extender.
Open a web browser and type mywifiext.net setup into the address box.
To log in, enter the credentials from your extender.
Either choose Administration or Settings.
Choose Firmware Updates and follow the on-screen instructions to update the software.
Restart the extender in order for the upgrades to take effect.

To connect a device to the Netgear EX6130 for WiFi, use that device.
Enter mywifiext.net setup into the browser’s address bar.
Enter the username and password here.
Click Log In to see the extender settings.
As needed, change the parameters.
Log out when you’re finished.

Netgear EX6130 | Reset Process

Locate the reset button on the Netgear EX6130.

Depress the reset button for a duration of five to ten seconds.

Press and hold the button until the power LED stops blinking.

Await the reset and restart of the extender.

Join the default WiFi network with a device.

Reinstall the extender by going back to the initial setup guidelines.