Netgear EAX20 AX1800 Setup

One of the most powerful extenders available now in the WiFi market is the Netgear EAX20 setup Dual-Band WiFi Mesh Extender Model: AX1800. You may connect as many devices as you like to the wireless network in your home without worrying about your internet speed reducing if you Netgear EAX20 AX1800 setup.

Netgear Nighthawk EAX20 Setup : Manual Method

  • On your device, connect the default Wi-Fi network of the Nighthawk EAX20.
  • Put “” into the address bar of an open web browser.
  • Typically, “admin” and “password” are the default username and password used to log in.
  • Change the settings on your extender using the setup wizard’s directions.
  • Connect your devices to the expanded Wi-Fi network so you may use it after setup is finished.

Note: If you need any assistance regarding your Netgear wifi extender, get in touch with us via the chat button you see on the bottom right corner of this page.

Netgear EAX20 Extender Setup : WPS Method

  • Start on the WiFi range extender Nighthawk EAX20.
  • Hold on until the solid green power LED light turns on.
  • Connect the WiFi router and Netgear extender properly.
  • On the back side of the AX1800 EAX20 extender, look for the WPS button.
  • Once located, carefully press the button.
  • Press and hold the button down for a short time.
  • After that, move your Netgear WiFi extender to a different place.
  • Connect your laptop or PC to the expanded network now.


Netgear EAX20 Wifi Extender Setup: Common Issues

  • Check the extender’s power and connection to make sure it is plugged in correctly and working.
  • Make sure the location is inside your router’s Wi-Fi range for the best signal strength.
  • To avoid login issues after setup, make sure the right username and password are used.
  • If the setup problems continue, try returning the extender to its factory settings.
  • If the issue remains unresolved after trying troubleshooting techniques, get help from Netgear support.

Nighthawk AX1800 EAX20: Firmware Update

  • Go to the Netgear support page to download the most recent firmware for the Netgear Nighthawk AX1800 EAX20.
  • Connect your mobile device or computer to the Wi-Fi network of the extender.
  • In the address bar of a web browser, type “” to access the extender’s settings.
  • Enter the firmware file that you got by going to the Firmware Update section.
  • To finish updating the firmware, follow the on-screen instructions.

Receive professional setup assistance for your Netgear devices, exclusively provided by

Netgear EAX20 WiFi Range Extender login

  • Using your device, connect to the Wi-Fi network of the Netgear EAX20.
  • Type “” in the address bar of a web browser that is open.
  • To access the login page, enter the default username and password, which are often “admin” for both.
  • To change the extender’s settings or setup it, follow the on-screen instructions.
  • Remember to log out for security once you’re finished.

Netgear EAX20 Reset Process

  • On the Netgear EAX20, find the reset button.
  • A paperclip or other similar item should be used to press and hold the reset button for 10 seconds.
  • When the LED lights flash, indicating that the reset is underway, release the reset button.
  • Wait for the reboot of the extender to return it to its normal factory settings.