Netgear EX3800 Setup | AC750

Do you want to increase your current networking device’s Netgear EX3800 setup by up to 750 Mbps? Use the Netgear EX3800 range extender, which is suitable with the newest 802.11ac and b/g/n items. You can stop worrying about internet dead zones once you’ve completed the Netgear EX3800 extender setup in your home. Why? The reason for this is because Netgear’s best technology will handle transforming them into entertaining areas. This entire page concentrates on the many approaches you can take to set up your Netgear range extender for the EX3800. Go on reading.

Netgear EX3800 Setup

Netgear EX3800 Extender Setup | Manual Method

  • After connecting in the Netgear EX3800 Extender, watch for the LED to become stable.
  • Connect into the WiFi network of the extender.
  • Put “ setup” into the address bar of an open web browser.
  • Use the default login information, which is often “admin” for both the username and password.
  • To finish the configuration, choose an already-existing WiFi network and input its password by following the on-screen prompts.
  • Enjoy smooth access to wider WiFi coverage.


Note: If you need any assistance regarding your Netgear Ex6110 extender so contact our technician via chat or visit the official website that is

Netgear EX3800 Extender Setup | WPS Method

  • Once the power LED on the Netgear EX3800 Extender has stabilised, plug it in.
  • The WPS button on the extender should be pressed.
  • Press your router’s WPS button within two minutes.
  • Hold off until the extender’s WPS LED solidifies, indicating a successful connection.
  • For best coverage, move the extender to the centre.
  • To enjoy wider WiFi coverage, connect your devices to the extended network.


Login Netgear EX3800 WiFi Range Extender

  • Create a WiFi connection with the Netgear EX3800 Extender.
  • Put “ setup” into the address bar of an open web browser.
  • Go in using your username and password.
  • Get to the configuration options and settings of the extender.
  • Change the settings as necessary to get the best results.
  • Make sure that every area has seamless extended WiFi coverage.


Netgear EX3800 WiFi Extender Firmware Update

Netgear EX3800 WiFi Extender Firmware Update

  • Go to “mywifiext net setup” in an open web browser.
  • Enter your admin credentials to log in.
  • Select “Firmware Update” from the “Settings” menu.
  • When the most recent firmware version is found, click “Update” if it is.
  • Wait for the extender’s reboot after the update is finished.
  • To be sure the upgrade was successful, confirm the firmware version.


Reset Netgear EX3800

  • Click the Netgear EX3800 Extender’s reset button.
  • Hold down the reset button for approximately ten seconds.
  • As soon as the LED indicators begin to flash, release the reset button.
  • Watch for the reboot and factory reset of the extender.
  • Re-join the WiFi network connected to the extender.
  • Adjust the extender’s settings as necessary.