Netgear EX6400 AC1900 Setup

Find out your Netgear EX6400 AC1900 setup with unlimited enthusiasm and expert guidance. Explore now.Once the extender is plugged in and connected to the network, use a web browser to reach the setup page and enter the information for your current WiFi network to setup it. You can set up a new password for the wifi range extender or use the existing network name and password. Once set up, you may carefully place the extender to enhance WiFi signal strength and coverage across your house or place of business.

Netgear EX6400 AC1900 Setup

Netgear EX6400 extender setup using manual method

Netgear EX6400 extender setup
  • Turn on the Netgear EX6400 AC1900 by connecting it into a power outlet.
  • Hold it until the solid green power LED lights on.
  • Use an Ethernet wire to connect the device to your current router.
  • In your usual web browser, type mywifiext net setup and hit Enter.
  • The Netgear AC1900 login screen will appear.
  • Press Log In after providing your default passwords.
  • Select the WiFi network that you wish to expand now.
  • Follow with the on-screen instructions to complete the Netgear EX6400 setup.

Note: If you need any assistance regarding your Netgear wifi extender, get in touch with us via the chat button you see on the bottom right corner of this page.

Netgear EX6400 Setup : WPS Method

The Netgear EX6400 setup using WPS, follow these steps:

  1. When plugging in the Netgear EX6400 AC1900 extender, watch for it to turn on.
  2. On the extender, press the WPS button.
  3. Press the WPS button on your router within two minutes.
  4. Wait for the solid green WPS LED on the extender.
  5. Connect the WiFi network of the extender with your devices.

How do I login Netgear EX6400 wifi range extender?

Here are simple steps to login to your Netgear EX6400 AC1900 extender:

  • Connect your device to the extender’s WiFi network.
  • Open a web browser and type “” in the address bar.
  • Enter the username and password (default is admin and password).
  • Click on “Log In”.
  • You will be logged into the extender’s settings page.
  • Make any necessary changes and click on “Save” to apply them.

Firmware update for netgear ex6400 extender

Here are simple steps to update the firmware on your Netgear EX6400 extender:

  • Connect your computer or mobile device to the extender’s WiFi network.
  • Open a web browser and go to “mywifiext net setup”.
  • Enter your username and password (default is admin and password).
  • Click on “Firmware Update” or “Settings” and then “Firmware Update”.
  • Click on “Check for Updates” and follow the on-screen instructions to download and install the latest firmware.
  • Once the update is complete, restart your extender to apply the changes

How do I reset the netgear wifi extender?

Here are simple steps to reset your Netgear WiFi extender:

  • Locate the reset button on your extender (usually a small hole).
  • Insert a paperclip or pin into the reset hole and hold it for about 10 seconds.
  • Release the reset button when the Power LED starts blinking.
  • Wait for the extender to reboot.
  • Reconnect to the default WiFi network (SSID) of the extender.
  • Reconfigure your extender’s settings as needed.


How do I reset the netgear wifi extender?